I think a strong laser straight to the CMOS chip is better since it can’t just be cleaned off.

This is not real right… Right… It’s a joke right? I hate the world because I really can’t tell.

Mine works beautifully for petg but pla not so good. Trick is absolutely clean. Fingerprints are enough to ruin it. Keep using dish soap and be sure to rinse well with warm water. Forget about isopropyl! Use a fine dry microfibre cloth before printing. You can use a spray of 1L water mixed with a few drops of dish soap on the cloth but if the plate is already clean a dry cloth can be enough most of the time.

Finally make sure your first layer height is adjusted correctly. The plastic needs to he squished slightly more into the textured surface. If in doubt go closer until you are defiantly too close (like almost scraping) and then back up up again. Then you are sure.

Copenhagen is too heigh on that list I think. It could still be a lot better. Still lots of dangerous right turns and non protected bike lanes and poor parking options. I’m most salty about lack of parking actually. Train stations also often lack elevators with proper space.

There are more in this series… They are used in Denmark FYI. This one is for hospitals so the cleaning lady does not plug the vacume cleaner into the same power lines as the life saving critical equipment but its compatible in the other direction if needed. The one you posted is the same idea but for IT equipment. EDB is the Danish equivalent to IT

One of the ingredients is best stored cold in the fridge and another is best stored at room temperature.

You’ll probably stumble upon withings, but as an owner of a watch for 8 years now I can not recommend. Their app is horrendous and pushing really hard on buying their plus subscription and just getting daily or historical information is convoluted… Okay haven’t opened the app in like 3 months now and apparently it looks quite a bit better now… I just lost trust in them. Their now older watch that I own tracks step counting terribly and heart rate monitoring is unstable.

With that said, their hardware has lasted for over 8 years now so theres that as a good thing.

I dont belive that your argument adds much to the discussion.

https://en.wikipedia.org/wiki/Ad_hominem

I’ve literally used Linux for over 5 years without ever noticing middle click did anything unusual until a colleagues showed me he could magically paste things with the mouse and I had to ask how he did it. Now I use it frequently and love the feature. I just don’t understand how you “keep accidentally paste stuff all over” when I’ve never heard any of my Linux friends and colleges ever mention anything about it and like me they were supprised and happy when I showed them the feature as well.

Why would you activate widows with middle clicks? I’m fine having the toggle button, I’m not against that. I just dont see the harm in leaving it as paste as default.

I did read it. I still do t understandthe issues. Most normal people do to my knowledge not even know they can middle click. And on most laptops three finger middle click is usually disabled by default. Having issues with “confusion” is to me a made up problem.

But why? It hurts noone to have that enabled.

As long as Micro$oft doesn’t get any of my money.

I’m so happy I purchased a 4 kg box of mixed citrus fruit last week.

Fordi det er “same procedure as every year James” Så selvfølgeligskal vi se den, det er jo tradition, og det kan der ikke laves om på.

Ive used the capresso for a number of years and I’ve generally been really happy with it. I can recommend it as a good entry level grinder to get started. It’s not too expensive and can last for a long time. I recently upgraded to a grinder from Eureka and been really happy with the upgrade. Gifted my old capresso to my parents who have been using a blade grinder for decades and they have been very happy with the upgrade. If you dont feel like spending too much right now it’s definetly the one to go with and then maybe if you feel like it, you can upgrade later now having more knowledge. You’ll also have a good gift to pass along to someone who is maybe less nerdy about coffee but appreciate the upgrade. Or settle with it and keep it till it wares out.
Some notes about the grinder: it’s a little uneven but still miles better than a blade grinder. Be sure to clean the inside by scraping off any deposits on the carrier around the burrs. The build up will make the grind very uneven and create lots of fines. After a clean it’s good again.

PS “Nivona Cafe Grano” is the exact same grinder just in Europe.

Interview skills should be a pie chart or horizontal bar just to highlight that they are also irrelevant.

Had the only printer in my dorm room of about 70 rooms and charged just slightly less than the university did per page so naturally people printed with my printer. Made some scripts that hooked into google cloud print to log users and had spreadsheet to track funds for users and send emails about what was printed and how much funds they had left. I made mony only because people forgot they had extra funds when they moved out and never asked to get it back. Its not a lot but stil strange to me why I put so much effort into a very low profit business.

I think of the interviewer ask this specific question they aren’t sophisticated enough to expect anything else than the “correct” answer. The question is so old, stupid, and irrelevant that anyone smart enough to ask actual good interview questions would never lead with this.

The “correct” answer doesnt work for led bulbs. A more modern answer would be why the hell can i only go to the room once!? Or you could get a friend/coworker to go to the room and just observe the bulb. One blink switch one, two blinks switch two etc. Lastly if you know a random switch is controlling a light in another room, why the hell is that switch not labeled if you already knew about it. Like how did this problem even arise in the first place. Also if you just want light in the room right now just turn all 3 on and go to the room.