So of your dont want to build a very long/tall 3d printer i recommend looking into building a flat long CNC frame for a laser/Plotter. They want to be long and flat, fitting your parts. I build a voron, several cartesians from scratch aswell as a giant laser frame. A Laser frame is much more simple compared to sth as overengineered as a voron(Perfection), far better suited to waste some spare parts with out getting lost in a one year project. Id have loved those rails for my laser.

Now do Sote

https://www.kab24.de/

Kleiner Inhaber geführter Laden, gute Preise, nette Beratung bei Bedarf.

Go go russian Propaganda. Vlad is riding unicorns n shit!

there is no issues with humidity

Nooope

Nope

Seems like everyone shouts dry your filament when they have no clue whats going on. This is just a very hard print with a not perfectly calibrated printer. Has nothing to do with filament humidity. Nothing at all. Calibrate & fine tune the printer. The printing communities feedback/advice is getting progressively worse while printing gets more accessible year for year.

Is this considered content now? 20 min im never getting back. Just empty babbeling and more rambling.

This is just plainly wrong

Freedom soap and alot of hot water is all you need. If thats not enough and you havent invaded the bed in weird ways before its probably bad Start code or user error.

Its PEI, powder coated. Everything should stick to it with out any adhesives. Soap?

I habe never used mek, but acetone on abs. Works like a charm.

either have something like KAMP handle your meshing adaptively before every print (takes more time every print, will work even with different bed);

or by having a fixed bed without any adjustable screws/etc., creating a proper bed_mesh (eg bicubic with an amount of probe_count on the higher side) and loading it in your print_start before every print. (will always work aslong as the bed/setup stays the same. Gotta remesh when you change beds)

Klipper with proper mesh and a reliable Probe on a fixed bed can handle 1mm range without any issues at all.

Quality content

Extruder Rotation distance? Slicer flow? Extruder arm tension? No physical clog?

This opinion is unacceptable

Same issue here Shit does indeed not work

Simply let someone reprint that part for you in ASA/ABS?